Capresso Ena 5 Service Manual download pdf (Page 31)

ENA 5

Rinse all nozzle parts thoroughly with

running water.

Reassemble the Easy Cappuccino Frother

and attach it to the Connector System

Dismantling and rinsing the 2-stage frothing

nozzle

To ensure the correct function of the 2-stage

frothing nozzle, clean it regularly if you have

heated or frothed milk.

CAUTION

Danger of burns on the hot nozzle and nozzle

connector.

Wait until the nozzle has cooled before

cleaning.

Carefully remove the nozzle from the

Connector System

Unscrew the nozzle using the hole on the

measuring spoon for pre-ground coffee.

Rinse all three nozzle parts thoroughly

under running water.

Reassemble the nozzle and attach it to the

Connector System

Removing foreign objects

Even the highest-quality coffee beans can contain

foreign objects. These can block the grinder.

WARNING

Danger of injury to the fingers when the grinder is

running.

Switch the machine off with the On/Off

button before performing any work on the

grinder.

Disconnect the mains plug.

Remove the bean container cover.

Remove the coffee beans with a vacuum

cleaner.

Release the screw of the finger guard and

remove the finger guard.

Remove the remaining coffee beans with a

vacuum cleaner.

Position the grinder key.

Turn the key counterclockwise until the

trapped foreign object is released.

Remove the foreign object.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

Comments to this Manuals

No comments

Capresso Ena 5 Service Manual Page 31

Comments to this Manuals

Related products and manuals for Coffee makers Capresso Ena 5