Capresso Impressa S8 Operations Instructions download pdf (Page 25)

the tray for approx. 20 seconds and then replace it.

• Place a large container (24 oz.) underneath the

coffee spout (Fig.1, 1).

ADD TABLET/ PRESS CLEANING

• Open the ground coffee funnel lid (Fig.1,10) and drop one

white tablet into the opening (Fig.23).

• Push the TABLET CLEANING button (Fig.3A,S) again.

• The machine will start the automatic cleaning program by

dispensing water in intervals into the container underneath

the coffee spout.

• When finished, the display shows EMPTY TRAY and the

machine "beeps".

• Remove the tray. There will be water in the tray and in the

used coffee container. Empty, clean and replace.

RINSE UNIT

• Place a cup underneath the coffee spout and push the

RINSE button (Fig.2,F).

COFFEE READY

• Clean the ground coffee funnel after each cleaning cycle.

• Remove the funnel and rinse under hot water and dry.

• Replace funnel (Fig.21 and 22).

17.2 DECALCIFYING

The machine has an integrated decalcifying program. When the

shows UNIT CALCED it is time to decalcify the machine. You

can still make coffee. However, it is highly recommended that

you decalcify the machine within the next 2 days.

Note: If you use the Claris water cartridge

and the message

UNIT CALCED is displayed, then your cartridge function is not

activated. Follow the instructions in chapter 11a.

Run the decalcifying program only after the machine has been

switched off for at least 5 hours and has cooled down

completely. IMPORTANT: The decalcifying program must not

be interrupted.

DECALCIFYING AGENT:

Only use our special decalcifying tablets. For supplies see

chapter 19.

CAUTION: Never use vinegar or any other decalcifying agent.

This might damage internal parts of the machine.

Decalcifying Procedure

UNIT CALC

• Remove, empty water tank and replace

• Turn off machine and let it cool down for approx. 5 hours.

• Open cover (3), push and hold the DECALC button

(Fig. 3a,T1) until you hear a "beep".

EMPTY TRAY

ATTENTION: Even if the drawer is empty you must remove it

for at least 20 seconds. Replace drawer.

AGENT IN TANK

• Remove Water Container. Fill with 20 oz. of water and

completely dissolve the contents of one blister pack (2

tablets).

AGENT IN TANK / OPEN TAP / PRESS CALC

• Make sure that the frothing attachment is removed and place

a large container under the steam nozzle (Fig. 4).

25.

1 2 ... 20 21 22 23 24 25 26 27 28 29

Comments to this Manuals

No comments

Capresso Impressa S8 Operations Instructions Page 25

Comments to this Manuals

Related products and manuals for Coffee makers Capresso Impressa S8