Capresso Impressa Z5 Service Manual download pdf (Page 14)

 COFFEE READY



To stop the brewing process prematurely, press any of the

product keys.

You can pre-select the strength of your coffee when the ma-

chine is ready to brew ( PLEASE SELECT). To

do so, turn the Rotary Switch (B) until the display indicates

the desired coffee strength and then press the coffee key of

your choice (key F for special coffee).

You can change the amount of water while the machine is

brewing coffee. To do so, turn the Rotary Switch (B) until

the display indicates the required amount (ML). The amount

of water can be selected in increments of 5 ML.

The amounts given in ML are approximate values and may

vary from the effective quantity.

9. Cappuccino

9.1 Making cappuccino

 COFFEE READY



 Take the milk hose out of the Welcome Pack. (We recommend

using the short hose with the vacuum milk container and the

long hose with a milk carton). Connect the hose with the suction

pipe projecting from the vacuum milk container. Then attach the

other end of the hose to the cappuccino nozzle (Fig. 8).

 Turn the selector switch (1, Fig. 9) to the milk frothing range

(a, Fig. 9).

 Place 1 cup under the cappuccino nozzle and press the Cappuc-

cino key .

 CAPPUCCINO

 MILK

 The machine stops drawing milk automatically as soon as the set

amount of milk (in SEC) has been used.

 CAPPUCCINO

 NORMAL (example)

 The coffee brewing process stops automatically as soon as the

set amount of coffee has been made.

 COFFEE READY



To stop the frothing or the brewing process prematurely,

press the Cappuccino key again.

You can pre-select the strength of your coffee when the ma-

chine is ready to brew ( PLEASE SELECT). To

do so, turn the Rotary Switch (B) until the display indicates

the desired coffee strength and then press the key of your

choice (E for cappuccino).

You can change the amount of milk and the amount of water

while the machine is brewing coffee. To do so, turn the

Rotary Switch (B) until the display indicates the required

SEC (during frothing) or ML (during coffee brewing).

The amounts given in ML are approximate values and may

vary from the effective quantity.

9.2 Cappuccino rinsing cycle

10 min. after having made cappuccino or frothed milk, a

message on the display of your IMPRESSA will prompt you

to run a cappuccino rinsing cycle.

 COFFEE READY

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 36 37

Comments to this Manuals

No comments

Capresso Impressa Z5 Service Manual Page 14

Comments to this Manuals

Related products and manuals for Coffee grinders Capresso Impressa Z5