Capresso Cafe 115 Service Manual download pdf (Page 21)

2 Preparation

T Press any button as soon as there is sufficient coffee in the

cup.

Preparation stops. ‘Saved’ appears briefly on the display. The

set amount of water for one coffee is permanently stored.

‘Please select product:’ appears on the display.

E You can alter this setting at any time by repeating the above

procedure.

E You can also permanently set the amount for all specialty cof-

fees and hot water in programming mode (see Chapter 4 ‘Per-

manent settings in programming mode – Product settings’).

To obtain a perfect water flow, use the hot-water nozzle. You can find

the hot-water nozzle under the cover of the storage compartment.

The following temperatures can be selected for preparing hot water:

‘Low’, ‘Normal’, ‘X high’ (approx. 149–203 °F (65–95 °C)).

There is a danger of scalding from hot water splashes.

T Avoid direct contact with the skin.

T Carefully pull the cappuccino frother down and off.

T Open the storage compartment cover, take out the hot-

water nozzle and close the cover again.

T Attach the hot-water nozzle to the connector.

T Place a cup under the hot-water nozzle.

T Press the ‘Hot water’ button.

‘Hot water’ and the temperature are displayed.

E By pressing the ‘ < ’ or ‘ > ’ button several times (within appro-

ximately 2 seconds) you can set the temperature to your indi-

vidual preference. This setting is not saved.

‘Hot water’, hot water flows into the cup. Preparation stops

automatically and ‘Please select product:’ appears on the

display.

Hot water

CAUTION

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

No comments

Capresso Cafe 115 Service Manual Page 21